SKID MAX 3X 96" DIRT & GRAVEL GRADER
The SKID-MAX 3X graders come with bolt on, reversible & replaceable skid shoes and bucket stops which allows you to carry and transport your bucket on top of your grader. We add D-Rings to the front cross member and also put holes in our bucket stops and include 3/4 inch, bow shackles so you can use a chain and binder to secure your bucket to the top of your SKID-MAX 3X grader for transporting on public roadways. The Newest SKID-MAX 3X model has 3 blades which gives you two blades facing forward which cuts, grades, mixes and levels material when you push it with your skid steer and now that we separated all 3 cutting assemblies, material is compacted by the reverse facing cutting assembly under the mount plate which also cuts and grades when you pull it in reverse. The material which is cut by this rear facing blade is forced under the two forward facing cutting assemblies which compacts and smooths the material and will remove your tracks left by your skid steer when you pull the grader in reverse. You get 2 cuts and one compaction going forward and 1 cut and 2 compactions in reverse.
These graders are very well built with many added braces and structural supports and the design of supporting the mounting plate to the blade holders, removes the large rear cross member and bracing which gives you the best view inside the grader as you are grading. There are similar graders out there but they are not built as heavy duty as our SKID-MAX 3X. We have a continuous flange on the top of our side pans which come together and tie in at the front nose to better support the sides and the nose of the grader from bending. We use two complete wrap around gusset to connect the mounting plate to the front tube. Comes with Bolt on, reversible skid shoes which can also be shimmed and not welded on as is the case on other graders on the market.
We now include a shim kit for our SKID-MAX 3X graders. The cutting edges stick below the skid approx 3/4 of an inch but if you put these 3/8 inch shims between the skid shoes and the side pans, they will stick down around 3/8 inch which is perfect for leveling out yards and doing final grades. Or, you can shim only one side with one or even two shims stacked on top of each other to crown roads.
The Extras We Include on our 3X Graders when compared to the competition: New 3 Blade Design unlike any on the market * Extra Heavy Duty, 2 Piece, 3/8 thick Mount Plate with 1/2 inch Top Rail for Best View Inside the Grader * Bolt On, Reversible Skid Shoes which are easy to replace and in stock * D-rings on front Cross Member and 5/8 inch Shackles Added to Bucket Stops to secure buckets for highway transportation * 3/8 inch SHIM KIT * Flange Side Pans (for strength and also beauty) * Larger Cross Member Gussets * Caterpillar Cutting Edges which are available locally * Epoxy Primer and Urethane Top Coat * MADE IN THE USA by 3rd Generation Builders * 24/7 Expert Tech Support
Best Pricing Policy
To insure that you receive the best pricing, Equipment Ring doe not offer an online ordering portal at this time. Please fill out the "contact" form, email or contact us by phone and we will include the most current discounts and best pricing available for the product.